OIDIO Pellucid Cable for 3-Pin mini-XLR Headphones

An OIDIO Pellucid series audio cable for 3-pin mini-XLR headphones, including AKG K182, K240, K271 MKII, K371, K550 MKIII, K553 MKII, K702, K712, K721, K7XX, & Q701, Beyerdynamic DT1770 Pro, DT1990 Pro, DT700 Pro X & DT900 Pro X, Pioneer HDJ2000, and Reloop RHP-20. This cable is made with one 3-pin mini-XLR by Rean at the headphone end, wired in the standard configuration.

Our Pellucid Series cables are made with 26AWG silver plated copper wire, of high purity with 19-strands per core and with a Teflon coating. Please note we are now using our original Pellucid wire supplier again that was used pre-2020, having switched in 2020 to a different one (Alpha Wire), as we have fixed the supply issue and with this 19-strand wire the cables are thinner and more flexible (and therefore better for users!). This type of cable is made with 4 strands of wire, braided in the round to reduce interference, and sleeved inside one paracord of your choice. It can be made to one of various lengths between 1-3m, with lengths above 1m costing more, where the length is the total approximate length from source connector to headphone connector to within a few cm, and includes the length of the connector body. Please keep in mind that changes to the cable spec in comparison to an existing cable you have can affect the sound/signal, for example longer lengths tend to sound more warmer/rounded because they usually have a greater capacitance and antenna effect. Therefore please be aware that if you order a length longer than your existing cable you may notice the sound is less clear or more round/warm by comparison. We have excluded balanced connection options from this listing as the headphone end only uses 3-pins, but if you would like an alternate connector type or 4-pin mini-XLR cable, see our other listings.

All our cables are soldered using lead-free silver solder (4% silver) to ensure the best quality joins for both signal and strength. The example images on our listings are as a guide only; any and all cable purchased may look slightly different to these example images.

Can't see an option you'd like? Contact us and we'll see what we do.

Current lead time: 10-20 working days (which is about 2-4 weeks as working days do not include weekends, bank holidays or other days we are closed). For approximate shipping times to your country check our FAQ.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

OIDIO Pellucid Cable for 3-Pin mini-XLR Headphones

  • Brand: OIDIO SOUND
  • Product Code: OP-3PIN
  • Availability: 2
  • £55.00


Available Options


Related Products

Tags: pellucid series, upgrade cable, 3-pin mini-xlr cable