An OIDIO Pellucid Series audio cable for Beyerdynamic DT177X GO headphones. This cable is made with one 4-pin mini-XLR at the headphone end, and unlike the standard 3-pin version can take a balanced connections. The mini-XLR headphone connector is a metal alloy with black paint and either be unbranded black or black Rean.

Our Pellucid Series cables are now made with 26AWG Alpha Wire, a high purity oxygen-free silver plated copper with a Teflon coating. This type of cable is made with 4 strands of wire, braided in the round to reduce interference, and sleeved inside one paracord of your choice. It can be made to one of various lengths between 1-3m, with lengths above 1m costing more, where the length is the total approximate length from source connector to headphone connector to within a few cm, and includes the length of the connector body. Please keep in mind that changes to the cable spec in comparison to an existing cable you have can affect the sound/signal, for example longer lengths tend to sound more warmer/rounded because they usually have a greater capacitance and antenna effect. Therefore please be aware that if you order a length longer than your existing cable you may notice the sound is less clear or more round/warm by comparison. We offer a range of source connector options, including standard TRS jacks and XLRs. If the source you wish to connect to uses a non-standard wiring, please contact us before ordering.

All our cables are soldered using lead-free silver solder (4% silver) to ensure the best quality joins for both signal and strength. The example images on our listings are as a guide only; any cable purchased may look slightly different to these example images.

Can't see an option you'd like? Contact us and we'll see what we do.

Current lead time: 15-20 working days (which is about 3-4 weeks as working days do not include weekends, bank holidays or other days we are closed). For approximate shipping times to your country check our FAQ.