OIDIO Pellucid-PLUS Cable for 3-Pin mini-XLR Headphones

An OIDIO Pellucid-PLUS Series audio cable for 3-pin mini-XLR headphones, including AKG K182, K240, K271 MKII, K371, K550 MKIII, K553 MKII, K702, K712, K721, K7XX, & Q701, Beyerdynamic DT1770 Pro, DT1990 Pro, DT700 Pro X & DT900 Pro X, Pioneer HDJ2000, and Reloop RHP-20. This cable is made with one 3-pin mini-XLR by Rean at the headphone end, wired in the standard configuration.

Our Pellucid-PLUS Series cables are similar to our regular Pellucid series, in that they are both made with a high purity oxygen-free silver plated copper with a Teflon coating and a similar form factor. The Pellucid-PLUS wire is generally better though, instead of the 19-strands per core on the regular version we've supersized this to a huge 100-strands per core, to achieve the maximum potential in signal quality for silver plated copper. The Teflon coating is also different, it is thinner and it is has a slightly different formula, helping to keep it flexible but also giving the cable a slightly thinner profile. So while it is thin on the outside, the internal gauge is wider, and in addition the copper inside is also OCC and a slightly higher purity by comparison. The Pellucid-PLUS only comes in one gauge, but with an overall diameter of approximately 0.9mm per wire core, it is suitable for almost every audio application. As with the standard version, these wire cores are braided first from the source, and sleeved inside a paracord colour of your choice, and can be made to one of various lengths between 1-3m, with lengths above 1m costing more. The length is the total approximate length from input connector to output connector to within a few cm, and includes the length of the connector body. Please keep in mind that changes to the cable spec in comparison to an existing cable you have can affect the sound/signal, for example longer lengths tend to sound more warmer/rounded because they usually have a greater capacitance and antenna effect. Therefore please be aware that if you order a length longer than your existing cable you may notice the sound is less clear or more round/warm by comparison. We also offer a range of source connector options.

All our cables are soldered using lead-free silver solder (4% silver) to ensure the best quality joins for both signal and strength. The example images on our listings are as a guide only; any and all cable purchased may look slightly different to these example images.

Can't see an option you'd like? Contact us and we'll see what we do.

Current lead time: 4-10 working days (working days do not include weekends, bank holidays or other days we are closed). For approximate shipping times to your country check our FAQ.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha
Please complete the captcha validation below

OIDIO Pellucid-PLUS Cable for 3-Pin mini-XLR Headphones

  • Brand: OIDIO SOUND
  • Product Code: OPP-3PIN
  • Availability: 5
  • £65.00


Available Options


Related Products

Tags: pellucid-plus, upgrade, cable, 3-pin mini-xlr cable