OIDIO Pellucid Jack to Jack Aux Cable

An OIDIO Pellucid Series audio cable with a standard stereo jack at either end. An ideal cable for certain stereo configs, microphones or connecting a phone/ipod to a car stereo or external speaker. It can also be used on a range of headphones (when using standard "3.5mm Generic Jack" option) including HiFiMan Edition S, Oppo PM-3 and Sony MDR-1A, MDR-1AM2, MDR-7520 & MDR-Z1000, as well as certain Audio-Technica, Beats, Bowers & Wilkins, Philips, Sennheiser, Ultrasone and Vmoda headphones that take a straight 3.5mm jack connection. Please contact us to confirm compatibility before ordering, branded plugs may not be so compatible, e.g. Amphenol will not work with the above headphones. We supply the cable as standard with our logo at both ends, but if you would like it just at the source end you can email us at the time of ordering.

Our Pellucid Series cables are made with 26AWG silver plated copper wire, of high purity with 19-strands per core and with a Teflon coating. Please note we are now using our original Pellucid wire supplier again that was used pre-2020, having switched in 2020 to a different one (Alpha Wire), as we have fixed the supply issue and with this 19-strand wire the cables are thinner and more flexible (and therefore better for users!). This type of cable is made with 4 strands of wire, braided in the round to reduce interference, and sleeved inside one paracord of your choice. It can be made to one of various lengths between 1-3m, with lengths above 1m costing more, where the length is the total approximate length from source connector to headphone connector to within a few cm, and includes the length of the connector body. Please keep in mind that changes to the cable spec in comparison to an existing cable you have can affect the sound/signal, for example longer lengths tend to sound more warmer/rounded because they usually have a greater capacitance and antenna effect. Therefore please be aware that if you order a length longer than your existing cable you may notice the sound is less clear or more round/warm by comparison. We also offer a range of source connector options, including standard TRS jacks, XLRs and newer balanced TRRS connection options. Please be aware that TRRS jacks are not compatible with non-balanced sources, e.g. 3.5mm TRRS will not work with a standard 3.5mm headphone out. For information about how we wire our 2.5mm and 3.5mm TRRS connectors please see our "Balanced and TRRS" page.

All our cables are soldered using lead-free silver solder (4% silver) to ensure the best quality joins for both signal and strength. The example images on our listings are as a guide only; any and all cable purchased may look slightly different to these example images.

Can't see an option you'd like? Contact us and we'll see what we do.

Current lead time: 10-20 working days (which is about 2-4 weeks as working days do not include weekends, bank holidays or other days we are closed). For approximate shipping times to your country check our FAQ.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

OIDIO Pellucid Jack to Jack Aux Cable

  • Brand: OIDIO SOUND
  • Product Code: OP-AUX
  • Availability: 3
  • £50.00


Available Options


Related Products

Tags: pellucid series, upgrade cable, aux