OIDIO Pellucid Adapter Cable

An OIDIO Pellucid Series audio adapter cable for converting between various connector types.

Our Pellucid Series cables are now made with 26AWG Alpha Wire, a high purity oxygen-free silver plated copper with a Teflon coating. This type of cable is made with 4 strands of wire, braided in the round to reduce interference, and sleeved inside one paracord of your choice. It can be made to one of various lengths between 0.15-2.5m, with lengths above 1m costing more, where the length is the total approximate length from connector end 1 to connector end 2 to within a few cm, and includes the length of the connector body. Please keep in mind that changes to the cable spec in comparison to an existing cable you have can affect the sound/signal, for example longer lengths tend to sound more warmer/rounded because they usually have a greater capacitance and antenna effect. Therefore please be aware that if you order a length longer than your existing cable you may notice the sound is less clear or more round/warm by comparison. We offer a range of source connector options, including standard TRS jacks, XLRs and newer balanced TRRS connection options. Please be aware that TRRS jacks are not compatible with non-balanced sources, e.g. 3.5mm TRRS will not work with a standard 3.5mm headphone out. For information about how we wire our 2.5mm and 3.5mm TRRS connectors please see our "Balanced and TRRS" page.

All our cables are soldered using lead-free silver solder (4% silver) to ensure the best quality joins for both signal and strength. We have recently taken a new stock of OIDIO logo heat shrinks with a much better quality print, and as such we are phasing out the clear coating on all connectors and splitters for a matte look across the range, with or without our logo. The example images on our listings are as a guide only; any cable purchased may look slightly different to these example images.

Can't see an option you'd like? Contact us and we'll see what we do.

Current lead time: 15-20 working days (which is about 3-4 weeks as working days do not include weekends, bank holidays or other days we are closed). For approximate shipping times to your country check our FAQ.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

OIDIO Pellucid Adapter Cable

  • Brand: OIDIO SOUND
  • Product Code: OP-ADPT
  • Availability: 3
  • £36.00


Available Options


Related Products

OIDIO Pellucid-PLUS Adapter Cable

OIDIO Pellucid-PLUS Adapter Cable

An OIDIO Pellucid-PLUS Series audio adapter cable for converting between various connector types.Our..

From £38.00

OIDIO Mongrel Adapter & Interconnect Cable

OIDIO Mongrel Adapter & Interconnect Cable

A Mongrel Series audio adapter cable for converting between various connector types, by OIDIO S..

From £37.00

Ready-made OIDIO Mongrel Adapter Cable - 0.5m Female 4-pin XLR to dual 3-pin XLR

Ready-made OIDIO Mongrel Adapter Cable - 0.5m Female 4-pin XLR to dual 3-pin XLR

A ready-made Mongrel Series audio adapter cable to convert standard 4-pin XLR to dual 3-pin XLR (sui..

From £62.00

Tags: pellucid series, upgrade cable, adapter,